Boneco U700 Specifications download pdf (Page 34)

CLEANING FUNCTION

The BONECO U700 is equipped with a descaling function.

All you need is a packet of BONECO CalcOff. One of these

packets is included with the appliance. You can obtain

more CalcOff bags from your BONECO specialist dealer or

our online store at www.shop.boneco.com.

The BONECO U700 uses this symbol to indicate that des-

caling is needed:

PROCEDURE

During descaling, the water is heated by the heater for 5

minutes and then pauses for 25 minutes each time. This

process repeats until the cleaning time has elapsed. The

cleaning time can be set between 1 and 4 hours. As a rule:

The longer the cleaning process, the better the results.

DESCALING THE APPLIANCE

1. Switch off the BONECO U700.

2. Empty the water base and the water tank.

3. Remove the Ionic Silver Stick

and the descaler cart-

ridge.

4. Mix 1 packet of CalcOff with 1 liter (a quarter gallon) of

water and pour the mixture into the water tank.

5. Place the water tank back onto the base of the unit.

6. Press the

symbol for 3 seconds. Descaling starts.

7. Tap the

symbol repeatedly to set the desired clean-

ing time. The cleaning time increases by one-hour

increments (max. 4 hours).

The symbol for the cleaning mode flashes on the display.

The BONECO U700 switches off automatically once the

cleaning time has elapsed.

8. Empty the water base and fill the water tank with tap

water.

The cleaning symbol goes out. The BONECO U700 is

ready for use again.

REMOVING LIMESCALE RESIDUE

Stubborn limescale residue on the membrane can be re-

moved using the yellow brush stored inside the BONECO

U700.

Never clean the membrane using sharp objects or

aggressive cleaning agents; doing so can damage

the BONECO U700 and voids the warranty!

DESCALING

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 275 276

Comments to this Manuals

No comments

Boneco U700 Specifications Page 34

Comments to this Manuals

Related products and manuals for Humidifiers Boneco U700